VVDI2 is a multifunctional automotive diagnostic platform, mainly for automotive maintenance(replace 2nd parts, diagnostics, keys, mileage etc)
Support OBD function for VW, Audi, Skoda, Seat, Porsche, Bentley, BMW etc
Support many transponders: Read/Write/Copy/Verify etc
Support Immobilizer Data Tool and make remote
Support Third – Party software, such as ODIS, VAS5054, Techstream, HDS etc
VVDI2 device need synchronize with server every 31 days. When you get 1 days in remaining synchronization time, run software, it will synchronize with server automatically, need internet support
VVDI2 can update firmware and software online
Activated Software List:
1) VV-01 VAG 4th immobilizer
2) VV-02 VAG 5th immobilizer
6) VB-01 BMW OBD
7) VB-02 BMW CAS4
8) VB-03 BMW FEM
9) VP-01 Porsche immo data tool
10) VPSA-01 PSA
11) VK-01 Transponder Programmer
12) VJ-01 Passthru J2534
13) Toyota H Software Activation
VVDI Prog User Manual
1. Built-in update software: Make VVDIProg firmware update timely.
2. High-speed USB communication interface: Make software automatically connect.
3. Smart operation mode: possible causes of error will be listed
4. Reserve ports: For future update.
5. Self-test function: Check if the machine works well or not.
6. Power supply: Through USB cable, software will automatically prompt if the external USB power supply is needed
BMW CAS4 & CAS4+ Test Platform
With this test platform, the BMW CAS4 CAS4 + key can be programmed on the workbench by OBD without opening the machine cover, thus avoiding car power loss and data loss caused by long time unlocking of the CAS4 / CAS4 + on the car.
Off-site key programming.
It can also test whether CAS or key is working properly, which is the preferred platform for locksmith and automotive electronics.
The wire is made of Japanese material, with built-in start button, indicator light,very user-friendly design, and most importantly, high quality and low price.
2019 New Type BMW FEM/BDC BMW F20 F30 F35 X5 X6 I3 Test Platform with Black Case
When making keys, BMW F series FEM & BDC all need to preprocess the IMMO box.. If there is no test platform,
it needs to disassemble and install the control unit in the car back and forth.. Using our test platform can be completed on the bench,
It's both economical and convenient.
The wire is made of Japanese material, with built-in start button, indicator light, IMMO box indicator light,
very user-friendly design, and most importantly, high quality and low price.