Chat with us, powered by LiveChat Skip to main content
VD17723
Product Information
  • $1.50
  • More than 10 available

  • Add to Wishlist
  • Manufacturer:
  • Status: New

Specs:

Manufacturer: BEST
Condition: New

  • Place the desoldering wick over the solder to be removed, then push the heated soldering iron tip onto the desoldering wick. The solder will be absorbed.
  • Remove the desoldering wick after the solder has been absorbed.
  • Cut off the used section of the wick using nippers.
  • Repeat steps 1 2 and 3 if the solder is not removed completely. Absorbability may differ depending on the type of solder. Sn63 Percent and 60 Percent (tin content) have good absorbability.

Features:

  • High quality alloy copper wire from the precision weaving.
  • For the removal of tin in the excess solder, resistance to oxidation and corrosion.
  • Thermal conductivity, tin effect is very good, tin suction clean, Low residue.
  • Suitable for precision circuit using.

 

Similar Items